RT-9010 Active Laser Target
  • -Actively detects laser illumination of target.
  • -Active sensing area allows greater ease of use.
  • -Onboard LED indicators for beam strike and power.
  • -Precision machined enclosure.
  • -Communicates Optomux-based data via RS-485.

The RT 9010 Laser Target is a time-based digital sensor that works in tandem with any of the rotating laser measurement devices from RT. It detects the laser illumination across its large 3" sensing area, and transmits this data to it's host computer so that interpretation of the beam strike data can occur in real time. Utilizing multiple targets, accurate measurements can be gathered from a large area or structure, allowing precision alignment or analysis. The RT 9010 communicates at 9600 baud via RS-485 digital data lines with any PC computer, ensuring compatibility and ease of setup, as well as access to advanced analysis software to interpret your measured data.

  • Resolution: +/- .003FS
  • Repeatability: +/- .03FS
  • Accuracy: +/- .1FS
  • Active Area: 3.0" minus the diameter of the laser beam
  • Beam Diameter: ~.250 (approx.)
  • Operational Distance: 10" to 80' from laser light source
  • Ambient Light Rejection: (AC) 1500 LUX (DC) 5000 LUX
  • Beam Dwell: 75us < Dwell < 1,5ms
  • Target Input Voltage: +/-12 VDC @ .25 Amp
  • Communication: RS-485, two or four wire (Optional RS-232)
  • Comm Protocol: Optomux dialect
  • Baud Rate: 9600, 8 bits, no parity, 1 stop bit